On the Right Track
This assembly kit creates an R/C model off-road truck which shows high performance on poor surfaces. Its chassis is based upon the TT-02 shaft-driven 4WD unit, with superlative traction from its four individual tracks that helps it plow through snow, sand, mud and other testing conditions. Its 1980s pick-up truck style body is molded in polycarbonate, with fog lamps, grille guard and roll bar recreated using separate metal-plated parts. A polycarbonate chassis cover and wheel well liners help prevent dirt and the like from getting into the chassis and potentially causing damage.

Tracked 4WD Fun: the TT-02FT Chassis
The TT-02FT chassis uses the shaft-driven TT-02 as a base, with track units in place of the four wheels. Each of the track units is attached to upper and lower suspension arms, and is powered via a drive sprocket that attached to the chassis drive shaft; they swing to allow superior contact with the running surface, and feature a sprung roller to allow easier negotiation of smaller obstacles. Plenty of ground clearance is on offer, too. Tracks are a plastic assembly type design with metal link pins, and give minimal power loss from friction for a smooth drive, even at lower speeds. Two types of link are included in the kit - standard, and jutting grouser designs - and can be used in tandem to customize your model's grip. The chassis features a CR-Tuned motor as standard.

˜…This image from the rear shows how the 1980s-inspired truck body and quadruple tracks make for a great look.

˜…Chrome-plated components for the front bull bars and fog lamps ensure that the model has superb realism.

˜…Moving around behind the cab, we can see that the roll bar is also a metal-plated part.

˜…Take a look at the Landfreeder Quadtrack's plentiful ground clearance, which helps it take on rough surfaces.

˜…The front double wishbone suspension features friction dampers to help cushion your ride.

˜…Track units are attached to the chassis drive shaft via a drive sprocket, and use eight individual rollers.

˜…Track units can also swing to help them maintain contact with the surface and give your model vital grip.

˜…The third roller in each track unit is sprung, allowing the unit as a whole to adapt to obstacles underfoot.

˜…Balanced shaft-driven 4WD is on offer thanks to the chassis' TT-02 base, with track units in place of tires.

˜…A polycarbonate chassis cover with wheel well liners helps prevent dirt and dust from getting inside.

˜…The rear double wishbone suspension also features friction dampers to help cushion your ride.

˜…2 link types are included - grouser and standard. Use them in the patterns shown for varying grip levels.

Specifications
˜…Length: 425mm, width: 247mm, height: 199mm ˜…Wheelbase: 251mm　˜…Surface contact: 60mm/track ˜…Track width: 39mm ˜…Bathtub-type frame ˜…Shaft-driven 4WD ˜…Front/rear 4-bevel resin differentials ˜…3-piece steering tie-rod ˜…4-wheel double wishbone suspension ˜…Front/rear friction dampers ˜…Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ˜…CR-Tuned motor ˜…Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
˜…2-channel R/C system w/ESC ˜…R6/AA/UM3 batteries for transmitter ˜…Battery pack & charger

Landfreeder Quadtrack TT-02FT 1/10 scale R/C kit

Have a question?